Printer and roll review
Confirm printer model, width, outer diameter, core, winding, paper basis, length basis and cutting or feeding requirements.
Buyer value: Reduces loading, feeding and premature roll-change problems before scale-up.
Compact payment-terminal format
57 mm x 30 mm Thermal Paper Rolls for Wholesale & OEM Supply
For distributors, payment-service suppliers and compact-device programs. Confirm the terminal model, 30 mm roll compartment, core, paper length, grade, packing and destination before quotation.
Nominal format
57 mm x 30 mm
Printer qualification
Model, width, core, maximum OD, feed and cutting review
Buyer fit
Payment-terminal suppliers, distributors and compact receipt programs
Order control
Approved roll, packing and repeat-order specification
Fast specification check
Send three facts to start
- 01
Equipment
Name the printer or share the current item.
- 02
Use
Tell us where and how the product is used.
- 03
Order
Add the quantity and delivery country.
01
Product fit
Is 57 mm x 30 mm the correct thermal paper roll for my procurement program?
57 mm x 30 mm is a compact direct-thermal receipt roll commonly reviewed for payment terminals and small portable printers. Suitability depends on the exact device, maximum outer diameter, 12 mm core requirement, winding, paper build and required length, so the printer or current roll should be qualified before a bulk order.
B2B buying answer
Qualification inputs
Use these inputs to confirm the roll, printer, adhesive and application before comparing supply offers.
Send the exact printer or terminal model and its media specification.
Confirm width, maximum outer diameter, core inner diameter and winding requirement.
Define paper basis, nominal or measured roll length, print-life requirement and storage conditions.
Provide quantity, carton preference, private-label artwork, destination and requested delivery window.
B2B supply program
Approve the roll specification before comparing bulk quotations
A repeatable supply program connects printer fit and paper performance with carton packing, private-label requirements, logistics and change control. Commercial terms are confirmed against the final specification.
Distributors and importers building a receipt-paper range
Private-label brands requiring roll, carton and pallet identification
Retail, hospitality and service groups standardizing media across locations
Procurement teams qualifying an alternative or second source
Paper and print review
Define base paper, thermal sensitivity, caliper, print density, storage and any documented chemical or regulatory requirement.
Buyer value: Keeps print performance and published claims tied to the selected material.
OEM and export packing
Review roll wrapping, labels, carton quantity, artwork versions, pallet marks, moisture protection and destination labels.
Buyer value: Creates a channel-ready packing reference for each SKU and market.
Bulk and repeat-order control
Freeze the approved material, dimensions, length basis, core, winding, artwork, packing and change-confirmation reference.
Buyer value: Makes repeat deliveries easier to compare, receive and investigate.
Minimum order, sample scope, production timing, packing options and documentation are confirmed after the final roll specification, quantity, artwork and destination are reviewed.
02
Risk control
Resolve the problems behind the roll specification
A size name does not define a production order. Confirm loading, cutting, adhesion, printing, scanning, packing, and repeat supply.
R1
Will the roll load and feed correctly?
A matching width does not prove that the outer diameter, core, winding, paper thickness or printer compartment is compatible.
Review response
Review the exact printer model and current roll, then confirm width, core ID, maximum OD, winding and feed or cutting requirements.
R2
Are two quotations based on the same roll length?
Rolls with the same outside dimensions can contain different lengths because paper basis, caliper, core and measurement method differ.
Review response
Record the paper basis, core, nominal or measured length, tolerance and verification method in the approved specification.
R3
Will the print remain readable for the required period?
Heat, light, plasticizers, oils, moisture and storage conditions can affect thermal image stability.
Review response
Define the real retention and storage requirement, select the material accordingly and confirm any performance statement against supporting evidence.
R4
Does the material meet the buyer's chemical policy?
BPA-free, BPS-free, phenol-free and other claims are not interchangeable and may apply only to a specific paper grade or document scope.
Review response
Name the required statement and destination, then verify the exact material code, issuer, subject, date and scope before approval.
R5
Will the reference packing work for this order?
Carton count, pallet height and container loading change with roll build, wrapping, pallet standard and route constraints.
Review response
Use the published figures as a reference packing plan and confirm the final carton, pallet and loading calculation with the approved roll.
R6
Will repeat orders match the approved shipment?
Uncontrolled paper, core, length, winding, carton or artwork changes can create printer and receiving complaints.
Review response
Freeze an approved master specification and require confirmation before a material, dimension, artwork or packing change.
03
Specification
Define the complete roll before comparing quotes
Use these fields to compare quotes. Put the final tolerance, material, packing, and test scope in the approved specification.
Roll and printer specification
Confirm these values against the printer manual, current roll or an approved physical sample.
- Nominal width
- 57 mm
- Imperial reference
- 2 1/4 in
- Nominal outer diameter
- 30 mm
- Length options
- 15 m / 12 m
- Core reference
- 12 mm
- Paper basis reference
- 48 g/m2
Legacy reference tolerance: +/-0.5 mm; confirm on the order specification.
Confirm paper basis, core and measurement tolerance.
Final paper grade and caliper require approval.
Reference packing and loading plan
These legacy planning figures are retained for initial logistics discussion and require confirmation against the final roll, carton and pallet standard.
- Reference carton
- 150 rolls per box
- Reference pallet
- 200 boxes / 30,000 rolls
- Reference pallet weight
- 600 kg
- Reference pallet dimensions
- 105 x 120 x 180 cm
- Reference 20 ft loading
- 11 pallets / 330,000 rolls
- Reference 40 ft loading
- 24 pallets / 720,000 rolls
Confirm net/gross basis and the final packing materials.
Commercial and approval inputs
A comparable quotation needs the same material, packing and delivery basis.
- Material and coating
- Confirm the direct thermal paper grade and the exact scope of any chemical or regulatory statement.
- Sample approval
- Confirm loading, feeding, cutting, print density and receipt handling in the intended device.
- Quantity
- Required quantity by size, paper grade, artwork version and destination.
- Packing
- Roll protection, carton quantity, labels, pallet standard and moisture protection.
- Destination
- Country, port or delivery point, shipping terms and required documents.
- MOQ and timing
- Confirmed after specification, quantity, artwork, packing and destination review.
04
Application
Match the adhesive and test plan to the real surface
The same roll can behave differently on another surface. Temperature, moisture, grease, and handling can change adhesion. Test the real application.
Payment terminals
Compact paper supply for card-payment devices with restricted roll compartments.
Confirm: terminal model, compartment OD, core, winding, feed and receipt length
Mobile payment devices
Small-format rolls for mobile or counter payment workflows.
Confirm: device model, print energy, roll cover clearance and change frequency
Compact receipt printers
Short rolls for equipment where footprint matters more than maximum meterage.
Confirm: printer model, feed path, cutter, paper basis and storage conditions
05
Approval route
Move from a qualified RFQ to a repeatable supply reference
Start with the use case and a complete specification. Approve samples and packing before bulk production. Keep the record for repeat orders.
- 01
Receive the RFQ
Collect buyer type, printer model, current roll, quantity, packing, destination and requested delivery window.
- 02
Qualify the printer
Review width, core, maximum outer diameter, winding, feed, cutter and current media reference.
- 03
Freeze the paper specification
Confirm paper basis, thermal response, caliper, length basis, tolerance and required document scope.
- 04
Review OEM packing
Confirm wrapping, roll labels, artwork versions, cartons, pallet marks and moisture protection.
- 05
Test samples
Agree loading, feeding, cutting, print-density and handling checks using the intended printer.
- 06
Approve the bulk order
Record the accepted sample, quantity, packing, documents, commercial terms and confirmed schedule.
- 07
Control repeat orders
Use the approved material, dimensions, artwork, packing and change-confirmation reference for replenishment.
06
Evidence
Approve the selected paper grade and test result, not a generic claim
A credible approval record identifies the printer, roll construction, paper grade, test settings, packing and acceptance result. Product, chemical, regulatory and certification claims must match the exact material and document supplied for the order.
Width, core, outer diameter, winding and feed result in the intended printer
Paper basis, caliper and measured or nominal length verification method
Thermal print density and receipt handling under the intended settings
Roll edge, dust, carton protection, pallet condition and arrival review
Approved material, artwork, packing and change-control reference for repeat orders
BPA-free, BPS-free, phenol-free, FSC, ISO, food-contact and regulatory statements are separate evidence scopes. Confirm the exact material, document, subject, date and destination requirement before publishing or approving a claim.
07
Request quote
Request a 57 mm x 30 mm supply review
Send product, size, quantity and destination through the contact page or WhatsApp.
08
Sourcing FAQ
57 mm x 30 mm Thermal Paper Rolls sourcing questions
Short answers on printer fit, adhesive, samples, packing, and repeat orders.
01What does 57 mm x 30 mm describe?
It describes the nominal roll width and outside diameter. It does not by itself confirm core, paper basis, actual length, winding, thermal grade, tolerance or printer compatibility.
02Will 57 mm x 30 mm fit every printer that accepts the same width?
No. Confirm the printer model, maximum roll diameter, core inner diameter, media path, winding and cutter or feed requirements before ordering.
03Why can rolls with the same size have different paper lengths?
Paper basis, caliper, core diameter, winding and the length measurement method affect how much paper fits within the same outside diameter. Compare the complete roll construction, not the size name alone.
04What information is needed for a quotation?
Send the printer model, current roll or specification, width, outside diameter, core, winding, paper basis, required length, quantity, packing, destination and requested delivery window.
05Can the rolls and cartons use private-label branding?
Private-label roll wrapping, labels, cartons and pallet marks can be reviewed after the specification, artwork versions, pack quantity and destination requirements are defined.
06Should we test samples before bulk production?
Sample testing is recommended for a new printer, paper grade, roll construction or supplier. Agree loading, feed, cutting, print density and handling checks before production approval.
07Is the published pallet and container quantity guaranteed?
No. It is a reference packing plan. Final quantities depend on the approved roll build, carton protection, pallet dimensions, weight limits and shipping route.
08How is the minimum order confirmed?
The minimum order depends on the paper grade, size, core, artwork versions, packing and destination. Send the estimated quantity so the production and packing basis can be reviewed.
09How are production and delivery timing confirmed?
Timing depends on the approved specification, sample scope, artwork, quantity, packing and destination. Include the required delivery window in the RFQ for a feasible schedule review.
10How are repeat orders kept consistent?
Use an approved master specification covering paper, dimensions, length basis, core, winding, artwork, packing and inspection references. Confirm any proposed change before production.
09
Related programs
Compare the next product route for your buying brief
Compare these routes when you need another format, printed branding, or a logistics program.
Adjacent roll size
57 mm x 40 mm
A larger compact roll for handheld and mobile POS printers.
For devices that accept more roll diameter and need fewer changes.
Review 57 mm x 40 mmAdjacent roll size
57 mm x 50 mm
A higher-capacity 57 mm roll for portable receipt workflows.
For mobile printers with a larger media compartment.
Review 57 mm x 50 mm
OEM and private label
Custom Printed Thermal Rolls
Review back printing, roll wrapping, carton artwork and pallet identification against the approved roll specification.
Best for distributors, retail groups and branded receipt programs.
Explore custom printed rolls